Shopping: Real Estate |  Costumes  |  Guitars
This Issue Archived Articles Blog About Us Contact Us

The Late-Model Mazda Rotary Engine Guide

We examine the range of late-model Mazda rotary engines

By Michael Knowling

Click on pics to view larger images

At a glance...

  • Guide to late-model Mazda rotary engines
  • Mechanical specs
  • Power and torque figures
  • Driveline configurations
Email a friend     Print article

One of the most innovative engine designs of the last 50 years is the Mazda rotary. With some major efficiency advantages over traditional reciprocating engines, the rotary is capable of producing massive power outputs from a modest capacity. It’s no wonder turbocharged versions can produce well excess of 200kW.

In this article we’ll examine the late-model rotary engines that provide plenty of power - with and without the assistance of forced induction.

20B Twin-Turbo

Click for larger image

The most powerful production version of the Mazda rotary is the 20B twin-turbo as fitted to up-spec versions of the Japanese market JC-series (1990 – 1995) Cosmo.

Even by today’s standards, the 20B twin-turbo is an absolute knockout. The officially quoted power output is 206kW but it’s widely acknowledged that the actual output is around 220kW. And there’s ample torque to go with the kilowatts – a maximum of 402Nm at 3500 rpm with over 390Nm available from just 2200 rpm...

We’re talking V8 killer here!

Click for larger image

The 20BTT delivers its punch thanks to an effective combination of extra cubes and a sophisticated sequential twin-turbo system.

The 20B engine is a triple rotor design which has a total rotor chamber volume of 2 litres. Interestingly, the 20B is essentially a twin rotor 13B with another 654cc rotor chamber hung off the end. Those triple rotor changers are boosted above atmospheric pressure thanks to a sequential twin-turbo system that is intended to deliver a broad spread of torque. The primary turbocharger provides meaningful boost pressure by 1800 rpm and the secondary turbo kicks in at around 4000 rpm. The transition from single to twin-turbo operation is kept smooth using a complex array of actuators and pressure lines - the transition is much smoother than, say, a Subaru Liberty B4. Maximum boost pressure is around 8.5 psi and charge-air temps are chilled by a front-mount air-to-air intercooler.

Click for larger image

Note that the 20B was produced in twin-turbo form only – there was never an atmo variant. Like all Mazda rotaries, this engine is configured for longitudinal mounting and, as far as we can determine, it comes with a 4-speed auto only.

The 20B is always in high demand and, as a result, you’ll pay quite a bit for one from the import wreckers. If you plan to transplant the engine into another car you’ll need to ensure you buy a half-cut rather than a bare engine – it’s almost impossible to configure the twin turbos without the associated factory control system and ECU.

13B Twin-Turbo

The second most powerful Mazda rotary is the 13B twin-turbo as fitted to the FD Series 8 (1999 – 2002) RX-7 Type R and RS.

Click for larger image

In Series 8 Type R and RS guise, the 13BTT makes dead-on 206kW at 6500 rpm. The smaller capacity of this engine (1.3 litres total rotor chamber volume) is a disadvantage compared to the 20B but it still makes bucket-loads of torque - a peak of 314Nm at 5000 rpm and 280Nm from as low as 3000 rpm.

Click for larger image

The Series 8 engine is the latest and greatest version of the 13B twin-turbo which was first seen in the base-spec 1990 Cosmo. The Series 8 Type R and RS engines produce their extra grunt thanks to altered HT-12 turbochargers (which operate sequentially like on the 20B), slightly increased boost pressure (up to 11 psi) and reduced exhaust backpressure. The static compression ratio remains at 9:1. The performance of the front-mount air-to-air intercooler is also enhanced by a redesign of the car’s nosecone to provide greater cooling airflow. Five-speed manual or 4-speed auto transmissions were offered.

Click for larger image

The Series 8 Type R and RS engines are quite rare and so are very expensive. You’re much more likely to find slightly less powerful versions at an affordable price.

The twin-turbo 13B fitted to the Series 6 and 7 RX-7 is rated at ‘only’ 187 - 195kW depending on production date, intended market and transmission choice. The base spec JC-series Cosmo also uses a 13B twin-turbo producing a surprisingly low 172kW. These are auto-only.

Again, if you want to run a 13B with an operational twin-turbo set-up, your best bet is to buy a half-cut – this ensures you have all the necessary hardware.

13B Single Turbo

Before the release of the sequential twin-turbo 13B came the single turbo version.

Click for larger image

The single turbo 13B was first introduced in the FC-series RX-7 of 1986. In early Series 4 versions, the 13BT delivers 136kW and 245Nm using a 8.5:1 static compression ratio, twin-scroll turbocharger and a top-mount air-to-air intercooler. Manual or auto tranmissions were offered.

In 1988, the turbocharged 13B was also fitted to the Japanese market Luce Limited and Royal Classic. We believe these engines are non-intercooled and, as a result, make slightly less power – 132kW. The Luce 13B turbo comes with an automatic transmission only.

Click for larger image

The final incarnation of the single turbo 13B was in the 1989 update of the FC-series RX-7 – the Series 5. The Series 5 engine boasts a less restrictive intercooler, different rotors and a revised turbocharger. The result is 151kW.

These single turbo 13B engines are becoming very hard to source from Japan in good condition. You’re almost better off buying a local engine that’s stuffed and having it rebuilt by a rotary specialist – at least you’re assured some longevity.


Click for larger image

When the Series 8 RX-7 was axed in 2002 it was the end of Mazda’s affiliation with rotary engine technology. But not for long.

In 2003, Mazda released a dramatically re-engineered version of the twin-rotor 13B known as the RENESIS rotary. The primary goals of this major rework were to improve fuel consumption and emissions.

Click for larger image

Compared to the original 13B, the RENESIS engine has relocated exhaust ports, a variable intake manifold, new generation injectors and electronic throttle control. With a high 10:1 compression ratio, this engine can generate up to 184kW at 9000 rpm. Note how much higher a naturally aspirated rotary needs to rev to achieve turbo-rivalling power... Australian versions are detuned to produce 177kW or 154kW, depending whether you select a manual or automatic transmission.

Fitted to the RX-8 only, the RENESIS rotary is not yet available in significant numbers from Japanese import wreckers. You may be able to find one in a crashed locally-delivered RX-8 - but don’t expect it to be cheap...

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...

Share this Article: 

More of our most popular articles.
Developing an aero undertray for a Toyota Prius!

DIY Tech Features - 19 March, 2005

Modifying Under-Car Airflow, Part 2

Exploring some potential ultra light-weight vehicle building materials

Technical Features - 11 August, 2009

Cardboard Cars?

How electric power steering systems work

Technical Features - 23 July, 2008

Electric Power Steering

What needs to happen to get to the next stage of aerodynamic slipperiness

Technical Features - 29 April, 2008

Analysing Road Car Drag

The future of cars - as seen from the 'Fifties!

Special Features - 22 November, 2003

Revisited: The GM Concept Cars

Building the workbenches

DIY Tech Features - 1 May, 2012

A New Home Workshop, Part 9

The world's brightest flashing bike tail-lights?

DIY Tech Features - 18 February, 2008

Building a High Performance LED Lighting System, Part 2

Cars that go but don't drink

Special Features - 16 June, 2008

Performance with Economy

DIY flow testing of the intake

Technical Features - 31 July, 2008

Free-Flowing a Miata MX5

The incredible land speed record Bluebird

Special Features - 3 April, 2006

World's Greatest Cars, Part 1

Copyright © 1996-2020 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip