Shopping: Real Estate |  Costumes  |  Guitars
This Issue Archived Articles Blog About Us Contact Us
SEARCH


Sleepy Subie

Forget Subaru Impreza WRXs - why not take the sleeper approach?

Words by Michael Knowling, Pix by Julian Edgar

Click on pics to view larger images

At a glance...

  • Factory 2.5 litre - with an aftermarket turbo kit
  • Huge torque spread
  • An interesting approach to better-than-WRX performance
  • A real sleeper!
Email a friend     Print article

It’s easy to identify a go-fast Impreza when you’re poised, raring-to-go at the traffic lights.

Keep an eye out for a bonnet scoop and ‘W-R-X’ lettering on the boot lid and you know you’re up against something quick. But if there’s no bonnet scoop and tell-tale badging, you’ve got no reason to sweat - any ol’ Falcodore will leave this ‘sleepie Subie’ in its dust.

But don’t be too confident – not all sleepy Subies are as they seem...

Click for larger image

This 2002 Impreza RS – owned by a nameless Melbournian – looks like a nice clean example from someone who takes a little bit extra pride in their machine. The clear-lens taillights and dual outlet polished rear muffler let you know the car isn’t an unwanted game-show prize. And then you notice the personalised number plates. Hmm, what does T-H-E-W-L-F spell?

RRRAAAAHHHHH!

Too late.

You’re wasted.

If you were a little bit quicker on the uptake you’d realise those plates mean ‘The Wolf’ – as in, a wolf in sheep’s clothing. And, yes, these plates really are warranted!

Click for larger image

Under the bonnet of this mild-looking Impreza RS is the standard 2.5 litre DOHC flat-four – with a turbo conversion! That’s right, Mr X passed up buying a showroom-stock WRX for an Impreza RS with hidden performance.

There are many advantages to this approach. The biggest advantage is the spread of low-to-mid rpm torque, which makes the car much easier to launch without bogging down. The other advantage is, of course, the sleeper appeal.

Click for larger image

The Impreza RS turbo kit is the product of Melbourne’s AVO (Advanced Vehicle Operations). In Stage One guise – as fitted here – the turbo kit comprises a replacement up-pipe (which bolts to the factory exhaust manifold) and a 320hp ball-bearing turbocharger with all necessary lines and hoses. A mandrel bent inlet pipe delivers induction air to the compressor through an AVO pod filter. The factory over-the-radiator cold air duct remains in place to help give the filter some relief from under-bonnet temperatures.

Click for larger image

Speaking of temperature relief, the heated charge-air from the turbo compressor is chilled by a plenty-big front-mount air-to-air intercooler. This is an optional upgrade from AVO’s base Stage One kit, which normally comes with a top-mount style intercooler. The intercooler plumbing is mandrel bent and there’s an AVO atmospheric-venting blow-off valve fitted immediately prior to the throttle body.

From the turbine housing, the 2.5’s exhaust gas is flung through a 2½ inch diameter dump pipe that’s also included as part of AVO’s Stage One kit. A high-flow exhaust is available but the standard exhaust remains in service – for now. The only exhaust mod is the dual outlet Magnaflow rear muffler, which gives the car its characteristic flat-four soundtrack.

Click for larger image

In Stage One configuration, extra fuelling comes from the addition of a ’80 horsepower’ extra injector mounted before the throttle. This is driven by a Link micro-fueller controller, which teams with the standard Subaru management system. The fuel pump and pressure regulator remain standard, which means there’s a limit to how much power can be produced.

The Stage One configuration increases power to just over 120kW at all four wheels (as measured on AVO’s DTS chassis dyno). This power output is achieved on just 4-5 psi boost, which means there’s no need for an aftermarket boost controller – all that’s needed is a hose from the compressor outlet to the wastegate actuator.

Note that Stage 2 involves an upgraded fuel system and around 9 psi of boost, which achieves around 150kW at all four wheels.

Click for larger image

This is a l-o-n-g way from the factory 112kW flywheel figure.

Mr X says the turbocharged engine pulls very strongly at all revs and there isn’t the agonising lack of low-down grunt experienced in 2.0 litre WRXs. But the long-stroke four isn’t a big revver as the power curve starts to nose over at about 5500 rpm. This is around 1000 rpm shy of redline.

So far, Mr X has had no grief from the standard Subaru driveline – and you’d hope not, considering the turbo kit has been fitted for less than a year.

The standard Impreza RS is widely praised for its WRX-like handling and grip so Mr X hasn’t needed to modify the original suspension. The brakes have also escaped spanners and sockets.

Click for larger image

The interior of the RS already comes decked out with wrap-around seats and a standard Momo airbag steering wheel. All Mr X has added are aluminium sports pedals. We’ve gotta say, though, the factory 220 km/h speedo is no longer up to the task.

So where does The Wolf slink to from here? Well, Mr X planned to revise the fuel system and increase boost but has recently decided to sell the beast. If anyone likes the idea of causing absolute dismay at the traffic lights, contact AVO for the contact details of Mr X.

Just mention The Wolf...

Contact:

AVO (Advanced Vehicle Operations)                    +61 3 9584 4499
AVO Turbo World

Did you enjoy this article?

Please consider supporting AutoSpeed with a small contribution. More Info...


Share this Article: 

More of our most popular articles.
Stopping the heat spreading

DIY Tech Features - 1 July, 2014

Making turbo heat shields

Riding a DIY electric bike

DIY Tech Features - 18 February, 2005

Building an Electric Bike Part 3

How to monitor the output of a factory-fitted wide-band oxygen sensor

DIY Tech Features - 23 September, 2008

Monitoring Factory Oxygen Sensors, Part 2

Why an engine's peak power figure is becoming increasingly insignificant

Technical Features - 12 June, 2008

Forget the Kilowatts

An extraordinary place from an extraordinary time

Special Features - 26 November, 2013

York Cold War Bunker

An astonishing car

Special Features - 20 May, 2014

The Rumpler Tropfenwagen

Testing performance

DIY Tech Features - 21 April, 2009

Ultimate DIY Automotive Modification Tool-Kit, Part 4

Changing flow patterns

DIY Tech Features - 30 April, 2013

Fitting vortex generators to a three-box sedan

Easy, cheap and effective

DIY Tech Features - 30 April, 2013

Building a home sound amplifier, Part 1

Finding the best place to put an engine cold air intake

DIY Tech Features - 10 July, 2001

Siting Cold Air Intakes

Copyright © 1996-2020 Web Publications Pty Limited. All Rights ReservedRSS|Privacy policy|Advertise
Consulting Services: Magento Experts|Technologies : Magento Extensions|ReadytoShip